Tag Archives: Nikon SLM MACHX

Formnext 2026 Recap: Bigger Beds, Faster Powder, and a Free 30% Upgrade

Formnext 2026 wrapped up in Frankfurt on Friday (November 17–20), and my preview last week had the theme right: go big, or go home. What the preview couldn’t tell you is that “big” this year mostly meant faster and cheaper per part, not a new way of printing. Heated chambers, high-flow extrusion, and multi-laser powder beds have been migrating down-market for years; Formnext 2026 was those ideas arriving at production scale with price tags and ship dates attached. Here’s the scorecard, desktop-relevant news first.

Raise3D: the machines shipped as promised, plus a free upgrade

Raise3D’s T450 and T700 large-format FFF printers debuted on the show floor exactly as announced: the T450 at $4,999 with a 450 × 350 × 400 mm build volume and a chamber heated to 70°C, the T700 at $15,999 with 700 × 500 × 1,000 mm and a 60°C chamber (Raise3D’s announcement). Deliveries start with the T450 by the end of December 2026, the T700 by the end of January 2027.

The more interesting Raise3D news for existing owners was free: a software and firmware update released November 17 raises the RMS220 SLS printer’s build height from 350 mm to 450 mm — nearly 30% more build volume with no hardware change (3DPrint.com). Raise3D estimates a 25–30% throughput bump in typical small-batch work. Free capacity via firmware is the kind of trickle-down I can get behind: it says the limit was software headroom, not physics, and the company chose to give it away instead of selling a new model number.

Bambu Circle: presented, waiting list open — still no US timeline

The question I flagged in the preview — whether Bambu Circle, Bambu Lab’s certified local-partner program, would get a US timeline — got a clear answer: not yet. Bambu presented the full program at Formnext and opened the waiting list for the first European partner cohort, with the pilot starting in the Netherlands and Germany and France following in early 2027 (Bambu Lab’s Formnext post; All3DP’s coverage). The long-term goal is an authorized partner within an hour’s drive of every European user. Financial terms and partner requirements still aren’t detailed, so for US makers this remains a watch-and-wait. The booth also showed the nine-tool H3C and the R1, Bambu’s 55 W CO2 laser cutter — its first machine that isn’t a 3D printer (3dprinting.com).

The powder-bed arms race: Stratasys, EOS, and Nikon

Three industrial launches define the show’s production story. None of them will sit on your bench, but all three are aimed at the service bureaus many of us already buy nylon and metal parts from — so their economics become our prices.

Stratasys H550 (SAF powder bed fusion). The mystery day-one reveal turned out to be a bigger sibling to the H350: a 34.2-liter build volume (365 × 208 × 450 mm), roughly 80% larger than the H350, with a fixed ~16.5-hour full-build cycle on PA12 (Stratasys product page; 3DPrint.com). Pre-orders opened November 17; commercial availability is planned for Q2 2027, pricing not announced. Stratasys claims up to 30% lower total cost of ownership versus comparable print-and-fuse systems — read that as vendor positioning against an unnamed rival (most readers will think of HP Multi Jet Fusion) until independent production data exists.

EOS HELIOR (SLS). EOS kept the P 770’s 700 × 380 × 580 mm build envelope but went from two lasers to three 70 W lasers with dynamic load balancing, plus a new independently adjustable roller recoater (EOS announcement coverage). EOS claims up to 80% more part volume in 24 hours as a best-case figure. Unlike the H550, HELIOR is commercially available starting December 2026 with validated parameters for PA 2200 and PA 2220 HighReuse — a shipping product, not a preview.

Nikon SLM MACHX (metal laser powder bed fusion). Nikon’s metal platform comes in three build envelopes — 450 × 450 × 450 mm, 450 × 600 × 450 mm, and 450 × 450 × 1,000 mm — with up to 8 kW of laser power and a claimed 25-minute changeover using an optional cylinder exchange that preheats the next build during the current one (TCT Magazine). Sales are planned from June 2027 in Europe and the US; no pricing yet.

Also announced: 3D Systems’ MJP 300 multijet printer (294 × 211 × 144 mm, available Q1 2027) (3D Systems’ release), and a crop of robotic and pellet systems — CMS’s six-axis Krearob, BigRep’s 750-liter PELLEX 750, Farsoon’s six-laser FS4X — all chasing large parts with less downtime (3DPrint.com’s large-format roundup).

What it means for the home shop

Three honest takeaways. First, nothing at Formnext 2026 changes what your desktop printer does tomorrow — the genuinely new items are scale, automation, and cost-per-part engineering at prices from $4,999 to “call us.” Second, the features keep marching toward prosumer machines exactly as they have for the last several years: actively heated chambers and high-flow hot ends were industrial talking points not long ago and are now mid-range desktop specs, and the T450’s $4,999 price for a heated 63-liter machine is the clearest sign yet of where that march is heading. Third, the free RMS220 upgrade is the model to watch — if more vendors unlock capacity in firmware instead of gating it behind new hardware, that’s a real win for owners.

If you buy parts from a bureau, the H550-versus-HELIOR-versus-MJF cost fight is the one that will show up in your quotes during 2027. If you print at home, Formnext 2026 mostly confirms the direction you already knew: bigger, hotter, faster — and, occasionally, free.